New multi-analyte methods for the determination of substances migrating from printing inks to dry food or food simulants.
Analytical methods for competent authority laboratories and for private laboratories.
Printing inks for food contact materials can be a source of food contamination during several steps, including baking, packaging and during storage or transport. The multi-analyte methods for the determination of substances migrating from printing inks to dry food or food simulants are intended for competent authority laboratories and for private laboratories to assess the safety of food contact materials and articles.
These methods were established under the aegis of the European Committee for Food Contact Materials and Articles (CD-P-MCA), following the 2020 adoption of the Resolution CM/Res(2020)9 on the safety and quality of materials and articles for contact with food, which aims at harmonising regulatory approaches to consumer health protection across member States by the Committee of Ministers of the Council of Europe.
The methods can be downloaded from FREEPUB.
Paper and board used in food contact materials and articles.
A technical guide for manufacturers and regulators.
Paper and board are materials that can be used in contact with food for different purposes, including baking, packaging and during storage or transport. While in contact with food or drinks, these materials can transfer substances, such as metals, antioxidants, colourants and plasticisers, which can cause contamination. The Guide provides definitions and requirements for materials made from fresh fibres and from recycled materials. It addresses suitable properties of adsorbents and functional barriers and describes the tests that need to be carried out to verify that the material quality is in compliance with the legal requirements and safe to use.
This guide was prepared by a dedicated group of experts and approved by the European Committee for Food Contact Materials and Articles (CD-P-MCA). This guidance is expected to improve the protection of consumers from contaminants in food that originate from contact with packaging and containers.
This Technical Guide can be downloaded from FREEPUB.
A practical guide for manufacturers and regulators
Metals and alloys are used in food contact materials and articles in food processing equipment, containers and household utensils as well as in foil used to wrap food. Metal ions can be released from these materials, into foods and, if the release exceeds the toxicological reference values, it may endanger the health of the consumer or unacceptably alter the composition of the food or its organoleptic characteristics.
The technical guide covers general provisions and recommendations which can assist national policy makers to adopt legislative and other measures aimed at reducing the health risks arising from consumer exposure to certain metal ions released into food from the contact with metals and alloys. It also provides technical information on specific release limits (SRLs) for metals and analytical methods for release testing of food contact materials and articles made from metals and alloys.
The technical guide was prepared by the former Committee of Experts on Food Contact Materials (P-SC-EMB) with the support of the former Consumer Health Protection Committee (CD-P-SC), the Steering Committee with responsibility for these activities. This guide supersedes the previously established Guidelines on Metals and Alloys (first issued on 9 March 2001 and revised on 13 February 2002 under the former Council of Europe Partial Agreement in the Social and Public Health Field).
- The electronic version of the guide can be downloaded for FREE online.
- The paper version is available for purchase at the EDQM Store.
- A Slovenian version is available online for free, thanks to the Slovenian Ministry of Health. For more information, please click here.